Skip to content

Thirty Years of Manufacturing in Mumbai

30+Years manufacturing
217Products on the website
13Modular plate ranges
3Brands

Vinayak Electricals has manufactured electrical products in Mumbai since 1995. We make modular and general switches, sockets, MCBs, LED lighting, spike guards, flex boxes, door bells, lamp holders and the accessories that go with them — all under one roof, at our own works in Andheri East. We are an ISO 9001:2015 certified manufacturer, and our switches, MCBs and LED products each carry their own BIS or ISI licence.

Everything below is what we actually make and how we make it. If you are looking to stock our range, the dealer and distributor enquiry card further down this page is the quickest route to a conversation.

What we manufacture

Three brands cover the range. KEMPS and VIZA are the modular plate families; VIYONA covers general switches, sockets and the wider electrical accessories line.

Brands, ranges and what each covers
BrandRangesCovers
KEMPS Modular4Peony, Orchid, Daisy and Aster modular plates
VIZA Modular9Cherry, Aqua Cherry, Slim, Glasso, Royal, Teyoma, V-Wood, Decore and Cristal plates
VIYONA Series10Switches and sockets, MCBs, MCB distribution boxes, LEDs, spike guards, flex boxes, door bells, dry irons, lamp holders and accessories

Ranges by brand

VIYONA Series
10 ranges
VIZA Modular
9 ranges
KEMPS Modular
4 ranges

23 ranges across three brands, from 217 products published on this website — our full line runs to over 2,000. Browse what is online on the products page, or see everything in the catalogue.

How the products are made

The advantage of manufacturing in one place is control over every stage. Mouldings, riveting, assembly and finishing all happen at our own works, so a fault does not travel between suppliers before anyone notices it.

Our modular plates are UV-protected and do not yellow, carry a 5-year warranty and fit all major modular switch systems.

Approvals and certification

Certification is per product category, not a single blanket claim. Each licence below is current and issued against a named Indian Standard.

Certifications held
CertificationLicenceScope
ISO 9001:2015E2024049408Quality management system, valid to 04/04/2027
ISI · IS 3854CM/L-7567794Switches
IS/IEC 60898-1CM/L-2544151Miniature circuit breakers
BIS · IS 16102R-71026514LED lamps
BIS · IS 10322R-71026476LED down lights and panels
BIS · IS 15885R-71026310LED drivers
BIS · IS 10322 (Part 5/Sec 5)R-71048526LED flood lights, 10, 15, 30, 50, 100 and 200 W
CE marking22800551073CELow Voltage Directive 2014/35/EU

The licence documents themselves, with their dates, are on our company profile.

Buying for a project or a shop? Every product page lists its MRP, the ranges it fits and the finishes available. Start at the full product range, or read the e-catalogue if you would rather browse the printed layout.

Where we are

Our works and offices are at KBM Compound, I-11 (K-14), Marol Maroshi Road, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059. Distributors and dealers across India stock the range, and enquiries from both trade and project buyers are welcome.

CORE PURPOSE / मुख्य उद्देश्य

To bring safety and comfort in people’s lives by developing innovative and reliable solution.

अभिनव और विश्वसनीय उपायों के विकास के द्वारा लोगों के जीवन में सुरक्षा और शांति लाना।

CORE VALUE / केन्द्रीय कार्यक्षमता

  • Innovation / नवाचार
  • Customer Focus / ग्राहक केंद्रित
  • Continuous Improvement / निरंतर सुधार
  • Respect for all / सभी का सम्मान
  • Result Oriented / परिणाम - मूलक

BHAG / साहसी ध्येय

To become one of the top three electrical companies of India by 2035

2035 तक भारत के शीर्ष तीन विद्युत कंपनियों में से एक बनाना हब।

BRAND PROMISE / ब्रांड वादा

Honouring commitments is our motto.

वचन प्रतिबद्धता ही हमारा आदर्श है।

The catalogue

The full printed catalogue runs to 52 pages and covers every series with dimensions, finishes and model numbers.

Vinayak Electricals product catalogue cover

More about the company: read the full company profile, download logos and brand artwork from the brand assets page, or see how to become a dealer or distributor.

Frequently asked questions

View all
Where are Vinayak Electricals products manufactured?
Everything we manufacture is made at our own works in Andheri East, Mumbai; our house wire is made for us by a partner. Injection moulding, riveting, assembly and finishing all happen in-house rather than being spread across outside suppliers.
Is Vinayak Electricals a certified manufacturer?
Yes. We hold ISO 9001:2015 for quality management, and separate product certifications for each category: ISI IS 3854 (licence CM/L-7567794) for switches, IS/IEC 60898-1 (CM/L-2544151) for MCBs and BIS IS 16102 (R-71026514) for LED lamps, IS 10322 (R-71026476) for LED down lights and panels and IS 15885 (R-71026310) for LED drivers.
How long has the company been manufacturing?
Since 1995 — over thirty years. Our full line now runs to over 2,000 products across three brands, with 13 modular plate ranges in KEMPS and VIZA.
What is the difference between the KEMPS, VIZA and VIYONA ranges?
KEMPS and VIZA are the modular plate families — KEMPS covers four ranges, VIZA nine, differing in finish, material and profile. VIYONA covers general switches and sockets plus the wider accessories line: MCBs, distribution boxes, LEDs, spike guards, flex boxes, door bells and lamp holders. Browse all three on the products page.
How do I become a dealer or distributor?
Apply through the dealer and distributor page. Dealer support and terms vary by region; we will explain them when you apply.
What materials are used in the modular plates?
Our modular plates are UV-protected and do not yellow, carry a 5-year warranty and fit all major modular switch systems. For the material of a specific plate range, see its product page or ask us.

Certifications & approvals

ISO 9001:2015 E2024049408 — quality management, valid to April 2027
ISI · IS 3854 CM/L-7567794 — switches
IS/IEC 60898-1 CM/L-2544151 — MCB
BIS · IS 16102 R-71026514 — LED lamps
BIS · IS 10322 R-71026476 — LED down lights & panels
BIS · IS 15885 R-71026310 — LED drivers
BIS · IS 10322 (Part 5/Sec 5) R-71048526 — LED flood lights
CE marking Low Voltage Directive 2014/35/EU

Modular plate ranges

All plates

Our Series

All products

From our blog

All articles
Manufacturing · Sep 2025
Modular Switch Manufacturing Process: How Switches Are Made
The modular switch manufacturing process step by step: moulding, contacts, plates, assembly and packing, and how we do it in-house at our Mumbai works.
Guides · Nov 2026
Outdoor Lights for House: Gate, Wall, Garden and Parking
Outdoor lights for house by spot: gate, compound wall, garden, porch and parking, with Vinayak LED codes, MRPs, IP rating to ask and RCCB wiring rules.

Become a dealer or distributor

Join a network built over three decades. Territory support, scheme pricing and a full product catalogue behind every order.

Loyalty programme

VINAYAK KONNECT

Our loyalty programme for electricians, distributors and dealers. Earn on every purchase and redeem against rewards.

  • Rewards
  • Savings
  • Prizes
  • Loyalty

For electricians, distributors and dealers

Download the app

Where to find us

Vinayak Electricals, KBM Compound, I-11 (K-14), Marol Maroshi Rd, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059

Open in Google Maps