Light Dimmers Made in Mumbai: Choosing and Buying the Right One
If you are looking for electrical dimmer manufacturers in Mumbai, you want two things: a dimmer that works smoothly with your lights, and a supplier who actually makes it. Vinayak Electricals manufactures modular dimmers at our own works in Andheri East, Mumbai — a 450W Tiny dimmer with an LED indicator and a Duro dimmer rated up to 1000W, both in the VIZA series. This guide explains what each does, how to check your lamps before you fit one, and how to buy.
Key takeaways
- We make two modular dimmers in the VIZA series: the Tiny dimmer (450W, LED indicator) and the Duro dimmer (up to 1000W).
- Many LED lamps are not dimmable. Check the pack says “dimmable”, or the light may flicker or buzz.
- A dimmer is for lights. A fan needs a fan regulator, never a light dimmer.
- Made at our Mumbai works under ISO 9001:2015; supplied through dealers across India.
- MRP is public; dealer pricing is shared on enquiry.
What an electrical dimmer does
An electrical dimmer is a control that sits on your switch board in place of an ordinary on/off switch and lets you set how bright a light burns. Instead of two states, full and off, you get a range: bright when you are cooking or reading, low when you want the room calm in the evening. The fitting stays the same; only the control changes.
Vinayak Electricals is one of the electrical dimmer manufacturers in Mumbai that makes the product end to end. Our dimmers are designed, moulded and assembled at our own works in Andheri East, Mumbai, under an ISO 9001:2015 certified quality process, and they fit the same standard modular frames as the rest of a board.
This page is about dimmers for lighting. Fans are a different load and need a fan regulator, which we cover on a separate page. Below we explain the two dimmers in our VIZA range, how to tell whether your lamps can be dimmed at all, how a dimmer sits on a modular board, and how dealers, electricians and contractors buy from us.
The two dimmers we make: Tiny and Duro
Our catalogue carries two dimmers, and the difference between them is the rating printed on the product.
Tiny dimmer 450W LED indicator — a compact modular dimmer with a small LED on the face, so the control is easy to find on a board at night.
Duro dimmer up to 1000W — the higher-rated unit in the range, for a point that controls more lighting than the Tiny is rated for.
Both carry their rating on the product and in the catalogue. That rating is the maximum the dimmer is designed for; it is not a target to load up to. Which one a given point needs depends on the lights connected to it, and that is a decision for the electrician wiring the circuit, who can see the fittings and the wiring behind them.
Rated capacity of our two dimmers
Basis: catalogue ratings of the VIZA Tiny dimmer (450W) and Duro dimmer (up to 1000W). Bar length is proportional to rated capacity. A rating is a maximum, not a recommended load — ask your electrician which unit a point needs.
We do not publish advice on how many lamps to put on a dimmer. The rating on the product is the limit; sizing the circuit against it is your electrician’s job.
| Tiny dimmer | Duro dimmer | |
|---|---|---|
| Rating | 450W | Up to 1000W |
| Indicator | LED on the face | — |
| Fits | Standard modular frames | Standard modular frames |
| Series | VIZA | VIZA |
| Controls | Lighting only | Lighting only |
| Made at | Our Mumbai works | Our Mumbai works |
Will your lights dim? Check the lamp first
The most common complaint about a dimmer is not the dimmer at all. It is the lamp. Many LED lamps sold in India are not dimmable, and nothing about their shape tells you so.
Check the pack Before fitting a dimmer, read the lamp’s packaging or the marking on its base. If it says dimmable, it is designed to work with a dimmer. If it says nothing, treat it as non-dimmable.
Flicker or buzz A non-dimmable LED on a dimmer can flicker, hum or buzz, and may not dim smoothly across the knob’s travel. That is the lamp’s electronics reacting to a control it was not designed for, not a fault in the switch board.
If a light flickers or buzzes after a dimmer is fitted, switch it off and check whether the lamp is marked dimmable before blaming the dimmer. Replace the lamp, not the control.
When you are buying lamps for a room that will have a dimmer, buy them dimmable from the start. It costs far less than fitting the room twice.
Only lamps marked dimmable are designed to work with a dimmer.
Never put a ceiling fan on a light dimmer — use a fan regulator.
Leave a slot in the modular frame for the dimmer when you plan the board.
Choosing the rating and fitting the dimmer are jobs for a licensed electrician.
Dimmer or fan regulator? They are not interchangeable
A dimmer controls a light. A fan regulator controls a fan’s speed. The two can look similar on a plate, which is why they get mixed up on site, but they are made for different loads.
Do not put a ceiling fan on a light dimmer. A fan needs a fan regulator built for a motor. Equally, a fan regulator is not the control to use for a lighting point.
We manufacture both. This page is about dimmers for lighting; for fan speed control, see our fan regulator and dimmer range, which covers regulators in detail, and the VIYONA electronic dimmer/fan regulator and plate type regulators in the product range.
On a new board, label each control. A dimmer and a regulator side by side are easy to confuse later — for you, and for the next electrician who opens the board.
How a dimmer fits a modular switch board
Our dimmers are modular: they take a slot in a standard modular frame, the same way a switch or a socket does. You do not need a special plate or a separate box to add dimming to a room.
That matters on a renovation. If a board already uses modular frames and plates, a dimmer can usually take the place of a switch module, subject to space in the frame and to your electrician’s check of the wiring. On a new build, plan the dimmer’s slot when you count modules for the board.
Because the dimmer is part of the VIZA range, it sits alongside VIZA switches, sockets and plates. See the VIZA modular series for the plates, finishes and modules it pairs with.
Plan the dimmer’s module when you plan the board. Adding one later is simple if a slot was left free; it is harder if every module is already spoken for.
Where dimmers earn their place
A dimmer is worth fitting wherever the same room is used in more than one way through the day.
Living room Bright for guests and cleaning, low for a film. Bedroom Full light to dress, soft light before sleep. Dining area Working light while serving, a warmer level at the table.
Hotels and restaurants Contractors on hospitality projects use dimmers to set mood lighting across rooms from one board. Showrooms Retail spaces use them to change the feel of a display without rewiring.
Where a dimmer adds little: a store room, a utility area or a corridor that only ever needs full light. There, an ordinary switch is simpler. Match the control to the use, not to the look of the board.
Where a dimmer typically adds value (indicative)
Indicative, qualitative judgement from how rooms are used, not measured data. It shows where varying brightness is useful; it says nothing about load or energy.
Why buy from a Mumbai manufacturer
Buying from the people who make the product changes what you can ask for. We are a manufacturer, not a trader, and every dimmer we sell comes off our own line.
Own works in Mumbai Tooling, moulding and assembly are done at our works in Andheri East. ISO 9001:2015 Production runs under a certified quality management process. 30+ years We have been making electrical accessories for more than three decades.
For a contractor that means a single point of contact for the dimmer, the switches around it and the plate over them. For a dealer it means the dimmer arrives with the rest of a 2000+ product catalogue rather than as a one-off line from a different supplier.
One manufacturer behind the whole board — dimmer, switches, sockets and plate — means matching finishes and one place to go if something needs attention.
Our Mumbai works and how we supply India
All of our manufacturing is in Mumbai, at our works in Andheri East. Our Ahmedabad branch is a warehouse that holds stock for faster despatch; it is not a factory.
From Mumbai, our dealer and distributor network reaches Mumbai Ahmedabad Delhi Bengaluru Chennai Hyderabad Pune Kolkata and many smaller cities.
If you are in Mumbai, buying through a local dealer is usually quickest. Outside Mumbai, the same range is available through dealers in your region, and we can point you to one through an enquiry.
We sell through dealers and distributors rather than direct to homes. Tell us your city in an enquiry and we will connect you with the nearest dealer.
Pricing: public MRP, dealer rates on enquiry
Our website shows public MRP so a homeowner can see what a product costs before visiting a shop. Dealer and distributor pricing is shared on enquiry only, because it depends on volume, scheme and territory.
Project buyers — builders, contractors, hotels — can ask for a quotation against a bill of materials. Send the list of points and modules, and we will price the dimmers together with the switches, sockets and plates on the same board.
To see the full range with product codes, download the e-catalogue. For a quotation or a dealer’s name, use the enquiry form.
Ask for the dimmer and its plate on one quotation. Pricing the whole board together is simpler than sourcing each part separately.
Becoming a dimmer dealer or distributor
We grow through dealers. A shop that already sells switches and sockets can add our dimmers and regulators to the same counter, backed by the full catalogue.
Scheme pricing Dealer rates and schemes are agreed on enquiry. Territory support We work with distributors on coverage in their region. Full range Dimmers sit alongside VIZA, KEMPS and VIYONA switches, sockets, plates and accessories.
If you want to stock our range, the steps are on how to become a dealer or distributor. Electricians who recommend our products can also reach us through the enquiry form.
Dealers who stock dimmers and fan regulators together answer both questions a customer brings to the counter: “can I dim this light?” and “can I slow this fan?”
Before you buy: a short checklist
1 Is every lamp on the point marked dimmable? If not, change the lamps first.
2 Is the point a light, not a fan? Fans need a regulator — see our fan regulator and dimmer range.
3 Which rating does the point need, Tiny 450W or Duro up to 1000W? Ask your electrician; do not guess.
4 Is there a free module in the frame, and does the plate finish match the rest of the board?
5 Is the work being done by a licensed electrician? Fitting any control means working on a live circuit.
Switch off the supply at the board before anyone opens a switch plate. Dimmer installation is electrician’s work, not a DIY job.
FAQs
Who manufactures electrical dimmers in Mumbai?
What dimmers does Vinayak Electricals make?
Can I use a dimmer with LED lights?
Can I use a light dimmer to control a ceiling fan?
How do I get dealer pricing for dimmers?
Do you supply dimmers outside Mumbai?
Why buyers choose Vinayak Electricals
- We make it. Designed, moulded and assembled at our own works in Andheri East, Mumbai.
- ISO 9001:2015 certified quality management process.
- 30+ years making electrical accessories.
- One board, one maker — dimmers, switches, sockets and plates across VIZA, KEMPS and VIYONA.
- 2000+ products in the catalogue.
- Nationwide dealers, with public MRP and dealer pricing on enquiry.
Need dimmers for a home, project or shop?
Tell us what you need and your city — we will send a quotation or connect you with the nearest dealer.
Send an enquiry
