Skip to content
KEMPS Daisy K135 10 AX bell push switch with indicator, 2-module

KEMPS DAISY Series K135

KEMPS Modular

₹164  *MRP incl. of all taxes

  • 10 Ax Bell Push Switch (indicator)
  • K135
  • 10 A
Specifications for KEMPS DAISY Series K135
Catalogue description 10 Ax Bell Push Switch (indicator)
Catalogue code K135
Current rating 10 A
Finishes and codes White K135 (₹164) · G.Grey K535 (₹194)
Width 2 modules
Action Bell push (momentary)
Indicator Yes
Box quantity 10 pieces
HSN code 85365020
Series KEMPS Modular
MRP ₹164 (incl. of all taxes)
Enquire about this product

Need it in bulk?

Trade and project pricing for dealers, electricians and bulk orders.

Request trade pricing

Certified & licensed

  • ISO 9001:2015 Quality management
  • ISI · IS 3854 CM/L-7567794 — switches
  • IS/IEC 60898-1 CM/L-2544151 — MCB
  • BIS · IS 16102 R-71026514 — LED lamps
  • BIS · IS 10322 R-71026476 — LED down lights & panels
  • BIS · IS 15885 R-71026310 — LED drivers

Fits these plate ranges

4

About the KEMPS DAISY Series K135

The KEMPS DAISY Series K135 is a 10 AX bell push switch (indicator) from the KEMPS Modular range. It is listed in the Vinayak Electricals catalogue as K135, and is manufactured at our Mumbai works.

It fits 4 plate ranges — PEONY Modular Plates, ORCHID Modular Plates, DAISY Modular Plates and ASTER Modular Plates — so the same module can be specified across a project without changing the plate design in every room.

In the printed catalogue it is listed under "20 AMP. 2M DAISY SWITCHES", packed 10 pieces to a box. It is sold by the full box, not as single pieces.

Match the rating to the load

The current rating is the maximum the accessory is built to carry, not a recommendation. A geyser, an air conditioner or an oven belongs on a 16 A or 20 A circuit of its own; lights and phone chargers do not need one. If you are unsure what a circuit draws, ask the electrician doing the installation.

One module, many plate designs

This module fits every plate range listed above, so a project can standardise on one set of modules and still vary the plate design room by room. It also means a replacement years later is a catalogue code, not a hunt for a discontinued look.

Using the KEMPS DAISY Series K135

Where it is used

Main door bell push Bungalow gate bell

What it pairs with

Catalogue codes to order with the KEMPS DAISY Series K135
Code Item MRP
K372 DAISY 2M plate (all colours) ₹380
231 VIYONA royal ding dong bell ₹220
237 VIYONA English tune bell ₹270

How it differs from its nearest alternatives

  • Against the KEMPS DAISY Series K121: Width 2 modules here, 1 module there; Indicator Yes here, No there; Box quantity 10 here, 20 there; MRP ₹164 here, ₹68 there.
  • Against the KEMPS DAISY Series K122: Width 2 modules here, 1 module there; Indicator Yes here, No there; Box quantity 10 here, 20 there; MRP ₹164 here, ₹122 there.
  • Against the KEMPS PEONY Series K114: Indicator Yes here, No there; MRP ₹164 here, ₹133 there.

MRP beside its nearest alternatives

KEMPS DAISY Series K135 ₹164
KEMPS DAISY Series K121 ₹68
KEMPS DAISY Series K122 ₹122
KEMPS PEONY Series K114 ₹133

MRP including all taxes, from the printed catalogue. "From" is the lowest code in a family. This product is the green bar.

Choosing a modular switch

Pick the switch type

Start with what the switch has to do. 1-way turns a light or fan on and off from one place. 2-way works in pairs, so a stair or corridor light can be switched from both ends. Bell push springs back when released, for a door bell. A DP switch breaks both wires and suits heavy fixed appliances. An indicator switch shows a small light when the circuit is on, which helps for a geyser you cannot see. See types of electrical switches for more.

Match the rating to the load

The rating is the most current the switch is built to carry safely. Lights, fans and small electronics sit on a 6A or 10AX switch. Heavy loads such as the geyser, air conditioner, microwave and iron need a 16A or higher-rated switch. Heavy load, higher rating 6A on a geyser

A switch that runs hot or sparks is a fault, not a quirk. Stop using it, switch off its MCB and call a licensed electrician. Our hot switch and sparking guide explains the signs.

Further reading

Goes well with

KEMPS Daisy modular plate in Sky Blue finish
Sky Blue
KEMPS Daisy modular plate in Wooden 2 finish
Wooden 2
KEMPS Daisy modular plate in Cool White finish
Cool White

DAISY Modular Plates — more from this range

KEMPS Daisy modular plate in Wooden 1 finish
Wooden 1
KEMPS Daisy modular plate in Sky Blue 2 finish
Sky Blue 2
KEMPS Daisy modular plate in Gray finish
Gray

Frequently asked questions

View all
What is the current rating of the KEMPS DAISY Series K135?
It is rated 10 A. That is the maximum the accessory is built to carry, not a target — a geyser, air conditioner or oven belongs on a higher-rated circuit of its own, while lights and chargers do not need one.
What is the price of the KEMPS DAISY Series K135?
The MRP is ₹164, inclusive of all taxes. Dealers, distributors and electricians buy at trade rates rather than MRP — ask us for current trade pricing, or for a quotation against a bill of materials.
How is the KEMPS DAISY Series K135 different from the KEMPS DAISY Series K121?
Width: 2 modules here, 1 module on the KEMPS DAISY Series K121; Indicator: Yes here, No on the KEMPS DAISY Series K121; Box quantity: 10 here, 20 on the KEMPS DAISY Series K121. Both are in our printed catalogue, which is where these figures come from.
How many KEMPS DAISY Series K135 come in a box?
The printed catalogue packs it 10 pieces to a box. We sell by the full box, never single pieces — anyone can buy, from a homeowner to a contractor.
What do I buy with the KEMPS DAISY Series K135?
From the same catalogue: K372 DAISY 2M plate (all colours), ₹380; 231 VIYONA royal ding dong bell, ₹220; 237 VIYONA English tune bell, ₹270. MRPs include all taxes.
Where can I buy the KEMPS DAISY Series K135?
Through our dealer and distributor network — we manufacture and supply the trade rather than selling direct, and orders are by the full box. Send an enquiry with your city and we will point you at the nearest stockist, or apply to become a dealer yourself.

Become a dealer or distributor

Join a network built over three decades. Territory support, scheme pricing and a full product catalogue behind every order.

Apply to become a partner
Loyalty programme

VINAYAK KONNECT

Our loyalty programme for electricians, distributors and dealers. Earn on every purchase and redeem against rewards.

  • Rewards
  • Savings
  • Prizes
  • Loyalty

For electricians, distributors and dealers

Download the app

Where to find us

Vinayak Electricals, KBM Compound, I-11 (K-14), Marol Maroshi Rd, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059

Open in Google Maps
Vinayak Electricals, Andheri East, Mumbai