Skip to content
KEMPS K107 20 AX 2-way switch, 1-module

KEMPS Peony 20A 2-Way Switch K107

KEMPS Modular

₹132  *MRP incl. of all taxes

Previously ₹160

17% off

  • 20 Ax 2 Way Switch
  • K107
  • 20 A
Specifications for KEMPS PEONY Series K107
Catalogue description 20 Ax 2 Way Switch
Catalogue code K107
Current rating 20 A
Switching 2-way
Finishes and codes White K107 (₹132) · G.Grey K507 (₹158)
Width 1 module
Indicator No
Box quantity 20 pieces
HSN code 85365020
Series KEMPS Modular
MRP ₹132 (incl. of all taxes)
Enquire about this product

Need it in bulk?

Trade and project pricing for dealers, electricians and bulk orders.

Certified & licensed

  • ISO 9001:2015 E2024049408 — quality management, valid to April 2027
  • ISI · IS 3854 CM/L-7567794 — switches
  • IS/IEC 60898-1 CM/L-2544151 — MCB
  • BIS · IS 16102 R-71026514 — LED lamps
  • BIS · IS 10322 R-71026476 — LED down lights & panels
  • BIS · IS 15885 R-71026310 — LED drivers
  • BIS · IS 10322 (Part 5/Sec 5) R-71048526 — LED flood lights
  • CE marking Low Voltage Directive 2014/35/EU

Fits these plate ranges

4

Also serving

7

About the KEMPS PEONY Series K107

The KEMPS PEONY Series K107 is a 20 AX 2-way switch from the KEMPS Modular range. It is listed in the Vinayak Electricals catalogue as K107, and is manufactured at our Mumbai works.

As listed, it is rated 20 A and the switching is 2-way.

It fits 4 plate ranges — PEONY Modular Plates, ORCHID Modular Plates, DAISY Modular Plates and ASTER Modular Plates — so the same module can be specified across a project without changing the plate design in every room.

In the printed catalogue it is listed under "20 AMP. 1M PEONY SWITCHES", packed 20 pieces to a box. It is sold by the full box, not as single pieces.

Where a 2-way switch is used

Two-way switching lets one light be controlled from two places — the classic case is a staircase, switched at the bottom and again at the top, or a bedroom light switched at the door and at the bed. It needs a pair of 2-way switches wired together; a 1-way switch will not do the job.

Match the rating to the load

The current rating is the maximum the accessory is built to carry, not a recommendation. A geyser, an air conditioner or an oven belongs on a 16 A or 20 A circuit of its own; lights and phone chargers do not need one. If you are unsure what a circuit draws, ask the electrician doing the installation.

One module, many plate designs

This module fits every plate range listed above, so a project can standardise on one set of modules and still vary the plate design room by room. It also means a replacement years later is a catalogue code, not a hunt for a discontinued look.

Using the KEMPS PEONY Series K107

Where it is used

Heavy loads from two places Hall with two entrances

What it pairs with

Catalogue codes to order with the KEMPS PEONY Series K107
Code Item MRP
K381 PEONY 1M plate (all colours) ₹350

How it differs from its nearest alternatives

MRP beside its nearest alternatives

KEMPS PEONY Series K107 ₹132
KEMPS PEONY Series K106 ₹107
KEMPS PEONY Series K102 ₹105

MRP including all taxes, from the printed catalogue. "From" is the lowest code in a family. This product is the green bar.

Choosing a modular switch

Pick the switch type

Start with what the switch has to do. 1-way turns a light or fan on and off from one place. 2-way works in pairs, so a stair or corridor light can be switched from both ends. Bell push springs back when released, for a door bell. A DP switch breaks both wires and suits heavy fixed appliances. An indicator switch shows a small light when the circuit is on, which helps for a geyser you cannot see. See types of electrical switches for more.

Match the rating to the load

The rating is the most current the switch is built to carry safely. Lights, fans and small electronics sit on a 6A or 10AX switch. Heavy loads such as the geyser, air conditioner, microwave and iron need a 16A or higher-rated switch. Heavy load, higher rating 6A on a geyser

A switch that runs hot or sparks is a fault, not a quirk. Stop using it, switch off its MCB and call a licensed electrician. Our hot switch and sparking guide explains the signs.

Further reading

Goes well with

KEMPS Peony modular plate in Z Black finish
Z BLACK
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty
KEMPS Peony modular plate in Pearl White finish
PEARL WHITE
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty
KEMPS Peony modular plate in Sky Blue finish
SKY BLUE
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty

PEONY Modular Plates — more from this range

Frequently asked questions

View all
What is the current rating of the KEMPS PEONY Series K107?
It is rated 20 A. That is the maximum the accessory is built to carry, not a target — a geyser, air conditioner or oven belongs on a higher-rated circuit of its own, while lights and chargers do not need one.
Where is a 2-way switch used?
Two-way switching lets one light be controlled from two places — a staircase switched at the bottom and again at the top, or a bedroom light switched at the door and at the bed. It needs a pair of 2-way switches wired together; a 1-way switch will not do the job.
How is the KEMPS PEONY Series K107 different from the KEMPS PEONY Series K106?
Switching: 2-way here, 1-way on the KEMPS PEONY Series K106; MRP: ₹132 here, ₹107 on the KEMPS PEONY Series K106. Both are in our printed catalogue, which is where these figures come from.
How many KEMPS PEONY Series K107 come in a box?
The printed catalogue packs it 20 pieces to a box. We sell by the full box, never single pieces — anyone can buy, from a homeowner to a contractor.
What do I buy with the KEMPS PEONY Series K107?
From the same catalogue: K381 PEONY 1M plate (all colours), ₹350. MRPs include all taxes.
Where can I buy the KEMPS PEONY Series K107?
Through our dealer and distributor network — we manufacture and supply the trade rather than selling direct, and orders are by the full box. Send an enquiry with your city and we will point you at the nearest stockist, or apply to become a dealer yourself.

Become a dealer or distributor

Join a network built over three decades. Territory support, scheme pricing and a full product catalogue behind every order.

Loyalty programme

VINAYAK KONNECT

Our loyalty programme for electricians, distributors and dealers. Earn on every purchase and redeem against rewards.

  • Rewards
  • Savings
  • Prizes
  • Loyalty

For electricians, distributors and dealers

Download the app

Where to find us

Vinayak Electricals, KBM Compound, I-11 (K-14), Marol Maroshi Rd, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059

Open in Google Maps