Skip to content
KEMPS K503 10 AX bell push switch, 1-module

KEMPS Peony 10A Bell Push Switch K503

KEMPS Modular

₹125  *MRP incl. of all taxes

Previously ₹150

16% off

  • 10 Ax Bell Push Switch
  • K503
  • 10 A
Specifications for KEMPS PEONY Series K503
Catalogue description 10 Ax Bell Push Switch
Catalogue code K503
Current rating 10 A
Finishes and codes White K103 (₹105) · G.Grey K503 (₹125)
Width 1 module
Action Bell push (momentary)
Indicator No
Box quantity 20 pieces
HSN code 85365020
Series KEMPS Modular
MRP ₹125 (incl. of all taxes)
Enquire about this product

Need it in bulk?

Trade and project pricing for dealers, electricians and bulk orders.

Certified & licensed

  • ISO 9001:2015 E2024049408 — quality management, valid to April 2027
  • ISI · IS 3854 CM/L-7567794 — switches
  • IS/IEC 60898-1 CM/L-2544151 — MCB
  • BIS · IS 16102 R-71026514 — LED lamps
  • BIS · IS 10322 R-71026476 — LED down lights & panels
  • BIS · IS 15885 R-71026310 — LED drivers
  • BIS · IS 10322 (Part 5/Sec 5) R-71048526 — LED flood lights
  • CE marking Low Voltage Directive 2014/35/EU

Fits these plate ranges

4

Also serving

7

About the KEMPS PEONY Series K503

The KEMPS PEONY Series K503 is a 10 AX bell push switch from the KEMPS Modular range. It is listed in the Vinayak Electricals catalogue as K503, and is manufactured at our Mumbai works.

It fits 4 plate ranges — PEONY Modular Plates, ORCHID Modular Plates, DAISY Modular Plates and ASTER Modular Plates — so the same module can be specified across a project without changing the plate design in every room.

In the printed catalogue it is listed under "6 & 10 AMP. 1M PEONY SWITCHES", packed 20 pieces to a box. It is sold by the full box, not as single pieces.

Match the rating to the load

The current rating is the maximum the accessory is built to carry, not a recommendation. A geyser, an air conditioner or an oven belongs on a 16 A or 20 A circuit of its own; lights and phone chargers do not need one. If you are unsure what a circuit draws, ask the electrician doing the installation.

One module, many plate designs

This module fits every plate range listed above, so a project can standardise on one set of modules and still vary the plate design room by room. It also means a replacement years later is a catalogue code, not a hunt for a discontinued look.

Using the KEMPS PEONY Series K503

Where it is used

Door bell push Flat entrance bell

What it pairs with

Catalogue codes to order with the KEMPS PEONY Series K503
Code Item MRP
K381 PEONY 1M plate (all colours) ₹350
232 VIYONA classic ding dong bell ₹210
238 VIYONA Hindi tune bell ₹270

How it differs from its nearest alternatives

MRP beside its nearest alternatives

KEMPS PEONY Series K503 ₹125
KEMPS ORCHID Series K543 ₹135
KEMPS PEONY Series K114 ₹133

MRP including all taxes, from the printed catalogue. "From" is the lowest code in a family. This product is the green bar.

Choosing a modular switch

Pick the switch type

Start with what the switch has to do. 1-way turns a light or fan on and off from one place. 2-way works in pairs, so a stair or corridor light can be switched from both ends. Bell push springs back when released, for a door bell. A DP switch breaks both wires and suits heavy fixed appliances. An indicator switch shows a small light when the circuit is on, which helps for a geyser you cannot see. See types of electrical switches for more.

Match the rating to the load

The rating is the most current the switch is built to carry safely. Lights, fans and small electronics sit on a 6A or 10AX switch. Heavy loads such as the geyser, air conditioner, microwave and iron need a 16A or higher-rated switch. Heavy load, higher rating 6A on a geyser

A switch that runs hot or sparks is a fault, not a quirk. Stop using it, switch off its MCB and call a licensed electrician. Our hot switch and sparking guide explains the signs.

Further reading

Goes well with

KEMPS Peony modular plate in Sky Blue finish
SKY BLUE
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty
KEMPS Peony modular plate in Bronze Copper finish
BRONZE COPPER
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty
KEMPS Peony modular plate in Z Black finish
Z BLACK
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M H, 12M SQ
  • UV-protected, does not turn yellow
  • 5-year warranty

PEONY Modular Plates — more from this range

Frequently asked questions

View all
What is the current rating of the KEMPS PEONY Series K503?
It is rated 10 A. That is the maximum the accessory is built to carry, not a target — a geyser, air conditioner or oven belongs on a higher-rated circuit of its own, while lights and chargers do not need one.
What is the price of the KEMPS PEONY Series K503?
The MRP is ₹125, inclusive of all taxes. Dealers, distributors and electricians buy at trade rates rather than MRP — ask us for current trade pricing, or for a quotation against a bill of materials.
How is the KEMPS PEONY Series K503 different from the KEMPS ORCHID Series K543?
MRP: ₹125 here, ₹135 on the KEMPS ORCHID Series K543. Both are in our printed catalogue, which is where these figures come from.
How many KEMPS PEONY Series K503 come in a box?
The printed catalogue packs it 20 pieces to a box. We sell by the full box, never single pieces — anyone can buy, from a homeowner to a contractor.
What do I buy with the KEMPS PEONY Series K503?
From the same catalogue: K381 PEONY 1M plate (all colours), ₹350; 232 VIYONA classic ding dong bell, ₹210; 238 VIYONA Hindi tune bell, ₹270. MRPs include all taxes.
Where can I buy the KEMPS PEONY Series K503?
Through our dealer and distributor network — we manufacture and supply the trade rather than selling direct, and orders are by the full box. Send an enquiry with your city and we will point you at the nearest stockist, or apply to become a dealer yourself.

Become a dealer or distributor

Join a network built over three decades. Territory support, scheme pricing and a full product catalogue behind every order.

Loyalty programme

VINAYAK KONNECT

Our loyalty programme for electricians, distributors and dealers. Earn on every purchase and redeem against rewards.

  • Rewards
  • Savings
  • Prizes
  • Loyalty

For electricians, distributors and dealers

Download the app

Where to find us

Vinayak Electricals, KBM Compound, I-11 (K-14), Marol Maroshi Rd, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059

Open in Google Maps