Skip to content
VIZA Mirchi V1215 switch module

VIZA Mirchi 10A Switches

VIZA Modular

₹62 – ₹102  *MRP incl. of all taxes, by model; see the table below

  • 10 A
Specifications for VIZA MIRCHI 10 A Switches
Current rating 10 A
Series VIZA Modular
Models and MRP
Code Model MRP
V1215 10 A 1 way switch ₹62
V1216 10 A 2 way switch ₹95
V1217 10 A bell push ₹90
V1218 10 A 1 way switch with indicator ₹94
V1219 10 A bell push with indicator ₹102
Enquire about this product

Need it in bulk?

Trade and project pricing for dealers, electricians and bulk orders.

Certified & licensed

  • ISO 9001:2015 E2024049408 — quality management, valid to April 2027
  • ISI · IS 3854 CM/L-7567794 — switches
  • IS/IEC 60898-1 CM/L-2544151 — MCB
  • BIS · IS 16102 R-71026514 — LED lamps
  • BIS · IS 10322 R-71026476 — LED down lights & panels
  • BIS · IS 15885 R-71026310 — LED drivers
  • BIS · IS 10322 (Part 5/Sec 5) R-71048526 — LED flood lights
  • CE marking Low Voltage Directive 2014/35/EU

Also serving

2

About the VIZA MIRCHI 10 A Switches

VIZA MIRCHI 10 A Switches is part of the VIZA Modular catalogue, manufactured at our Mumbai works. It is listed under VIZA Switches and Sockets.

Match the rating to the load

That is the most it is built to carry, not a target: lights, fans and small loads. A geyser, air conditioner or heater needs a 16 A or 20 A switch on a circuit of its own. If you are unsure what a circuit draws, ask the electrician doing the installation.

Choosing a modular switch

Pick the switch type

Start with what the switch has to do. 1-way turns a light or fan on and off from one place. 2-way works in pairs, so a stair or corridor light can be switched from both ends. Bell push springs back when released, for a door bell. A DP switch breaks both wires and suits heavy fixed appliances. An indicator switch shows a small light when the circuit is on, which helps for a geyser you cannot see. See types of electrical switches for more.

Match the rating to the load

The rating is the most current the switch is built to carry safely. Lights, fans and small electronics sit on a 6A or 10AX switch. Heavy loads such as the geyser, air conditioner, microwave and iron need a 16A or higher-rated switch. Heavy load: higher rating Never a 6A switch on a geyser

A switch that runs hot or sparks is a fault, not a quirk. Stop using it, switch off its MCB and call a licensed electrician. Our hot switch and sparking guide explains the signs.

Further reading

Goes well with

VIZA Cristal modular plate in Mint Green finish
Mint Green
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M, 18M
  • UV-protected, does not turn yellow
  • 5-year warranty
VIZA Royal modular plate in Pearl White finish
Pearl White
  • Sizes 1M, 2M, 3M, 4M, 6M, 6M (V), 8M H, 8M SQ, 12M, 18M
  • UV-protected, does not turn yellow
  • 5-year warranty
VIZA Cristal modular plate in Sky Blue finish
Sky Blue
  • Sizes 1M, 2M, 3M, 4M, 6M, 8M H, 8M SQ, 12M, 18M
  • UV-protected, does not turn yellow
  • 5-year warranty

VIZA Switches and Sockets — more from this range

Frequently asked questions

View all
What is the current rating of the VIZA MIRCHI 10 A Switches?
It is rated 10 A. That is the most it is built to carry, not a target: lights, fans and small loads. A geyser, air conditioner or heater needs a 16 A or 20 A switch on a circuit of its own.
Where can I buy the VIZA MIRCHI 10 A Switches?
Through our dealer and distributor network — we manufacture and supply the trade rather than selling direct, and orders are by the full box. Send an enquiry with your city and we will point you at the nearest stockist, or apply to become a dealer yourself.

Become a dealer or distributor

Join a network built over three decades. Territory support, scheme pricing and a full product catalogue behind every order.

Loyalty programme

VINAYAK KONNECT

Our loyalty programme for electricians, distributors and dealers. Earn on every purchase and redeem against rewards.

  • Rewards
  • Savings
  • Prizes
  • Loyalty

For electricians, distributors and dealers

Download the app

Where to find us

Vinayak Electricals, KBM Compound, I-11 (K-14), Marol Maroshi Rd, near Rainbow International, Ashok Nagar, Andheri East, Mumbai, Maharashtra 400059

Open in Google Maps