Key takeaways
- Our works is in Marol, Andheri East; Andheri station is about 5 km by road, Bandra 11 km and Dahisar 17 km.
- We supply Bandra, Khar, Santacruz, Vile Parle, Andheri, Goregaon, Malad, Kandivali, Borivali and Dahisar through dealers and by delivery.
- A redeveloped KEMPS 2BHK comes to ₹6,302 in parts at MRP.
- Dated board? A new plate clips over working modules; a 6M plate runs ₹110 to ₹820.
- Full boxes only; send our office an enquiry, or visit us in Marol, for the nearest dealer or a project quotation.
On this page 7 sections + FAQs
Switch manufacturer in Andheri: the short answer
We make switches, sockets, MCBs and lights in Andheri. Our only works is in Marol, Andheri East, and the Western suburbs from Bandra to Dahisar are our home ground: the same catalogue, printed MRPs and BIS-licensed switches go from the works to dealers along the whole line.
Being close helps most when something goes wrong years later: a replacement module, a matching plate or a question about a code is an enquiry to the people who made it.
The suburbs we supply, and how far they are
Road distance from our works
Measured from our works in Marol, Andheri East, on OpenStreetMap routing and rounded. Green is within 25 km, blue within 100 km, amber further. Travel time depends on traffic.
Map: the towns on this page
Drawn by us from OpenStreetMap positions, to scale. The km under each town is the road distance from our works; dashed lines show direction only, not the road.
Between those points sit Khar, Andheri, Jogeshwari, Goregaon, Malad and Kandivali. All of them are within about 17 km of our works.
| Town | From our works | How to buy |
|---|---|---|
| Bandra, Khar | About 11 km | Dealers in the area, or delivery |
| Santacruz, Vile Parle | About 8–6 km | Dealers in the area, or delivery |
| Andheri | About 5 km | Our office in Marol, dealers, or delivery |
| Jogeshwari, Goregaon, Malad | Between Andheri and Kandivali | Dealers in the area, or delivery |
| Kandivali, Borivali | About 16 km | Dealers in the area, or delivery |
| Dahisar | About 17 km | Dealers in the area, or delivery |
What the Western suburbs are building
- Society redevelopment: old buildings replaced by new towers need complete boards, flat after flat. A modular range with matching plates keeps every flat identical, and a 32A DP switch serves each geyser and AC.
- Office fit-outs around Andheri and Bandra: USB sockets, 16A points, LED panel lights and MCB distribution boards.
- Flat upgrades: changing a plate colour or one module, which modular makes simple; our plates fit all major modular systems.
Our works is in Marol, Andheri East.
Identical modular boards, flat after flat.
Our plates fit all major modular systems.
Switches to IS 3854, BIS licence CM/L-7567794.
A redeveloped 2BHK in KEMPS, at our MRPs
Redevelopment means every flat gets new boards at once. Our upgrade guide works through a typical 2BHK in KEMPS Orchid white: seven boards and 36 modules come to ₹6,302 in parts.
Where ₹6,302 goes in a KEMPS 2BHK
Printed MRPs from our current catalogue, as published in our product guides. Bars to scale; wire and labour are extra.
Multiply by the flats in the building and the plate finish quickly becomes the biggest single choice; a 6M plate runs from ₹110 to ₹820 depending on finish.
Upgrading an older flat: start with the plates
Plenty of flats here already have modular boards that look dated. If the modules work, a new plate can change the whole look without opening the wall: match the module count of each board and the new plate clips over the same frame.
Where a switch is failing or a socket runs warm, change the module too; our switch replacement guide covers the safe way.
Changing only the plates? A new plate of ours fits over existing modular switches of the same module count, so the wall does not need to be opened.
Everything we make for the Western suburbs, with prices
All made at our Marol works, and sold in the Western suburbs at the same printed MRP:
- Modular switches and switch sockets: from ₹45 (VIZA V000 6A 1 way); 16A sockets from ₹130 (VIZA V270). Modular switches.
- Slim and modern designer switches: VIZA Slim 6M plate ₹150; Glasso glass-style ₹748. Designer switches.
- 1 module and 2 module switches: 1M 6A socket ₹78, 2M 16A socket ₹160. 1 and 2 module switches.
- Concealed and surface boxes: concealed from ₹50, surface gang boxes from ₹65. Concealed boxes.
- MCBs and MCB boxes: 10kA, single pole ₹145; boxes from ₹40. MCBs.
- Fan regulators: electronic, 4 and 5 step, ₹215 to ₹495. Regulators.
- LED lights: flood from ₹490, street from ₹550, panel and down lights. LED lights.
Ask for the BIS licence number on any switch; ours is CM/L-7567794.
From our catalogue: KEMPS Orchid K543 bell push and VIYONA classic & royal ding dong bell.
How to buy in the Western suburbs
Buy from our dealers and distributors in the Western suburbs (send an enquiry for the nearest), or order through the office for delivery, in full boxes, with 15-day returns.
You can also visit our office in Marol, Andheri East; call first so the right person is there.
Projects: send a bill of materials through our contact page. Shops: see our dealer page.
FAQs
Is there a switch manufacturer in Andheri?
Yes. Vinayak Electricals makes switches, sockets, MCBs and accessories at its works in Marol, Andheri East.
Do you supply Bandra and Borivali?
Yes, through dealers in the area and by delivery. Bandra is about 11 km and Borivali about 16 km from our works.
Which switches suit a redevelopment project?
A modular range (KEMPS or VIZA) with matching plates in every flat, 6A switches for lights and fans, 16A sockets, and a 32A DP switch for each geyser and AC.
Can I change only the switch plates in my flat?
Yes, if the modules work: match the module count and a new plate clips over the same frame. Our 6M plates run from ₹110 to ₹820 by finish.
Can I buy directly from your works in Andheri?
Yes, through our office, in full boxes. Call first; most buyers use a dealer near them.
Do you make MCBs, LED lights, concealed boxes and fan regulators for the Western suburbs?
Yes. Besides switches and sockets we make 10kA MCBs and MCB boxes, LED flood, street, panel and down lights, concealed and surface boxes, and electronic fan regulators, all sold in the Western suburbs through our dealers and by delivery.
Why buyers choose Vinayak Electricals
- Making electrical accessories since 1995, today at our own works in Marol, Andheri East, Mumbai.
- ISO 9001:2015 certified; switches under BIS licence CM/L-7567794 to IS 3854.
- Switches, sockets, MCBs, boxes, regulators and LED lights: 2,000+ products from one maker.
- Printed MRPs, published code by code in our catalogue.
- Warranty of 5 to 10 years by product; modular plates 5 years.
- Dealers and distributors across Maharashtra, and delivery all over India.
Published 6 Oct 2026 · Updated 12 Nov 2026
Who designed it & wrote this
@Team of:
Gaurang Parmar
Fractional C-Suite Executive
STRATEGIC SOLUTIONS