Skip to content
Where we supply

Switches, MCBs and LED lights for Delhi NCR: Delhi, Noida and Gurugram

1,317 kmDelhi from our works

7 min read Published 7 Oct 2026Updated 12 Nov 2026 By Gaurang Parmar

7 short sections · FAQs at the end

Looking for a switch manufacturer in Delhi or anywhere in Delhi NCR? We are Vinayak Electricals: we make modular switches, sockets, MCBs, boxes and LED lights at our works in Marol, Andheri East, Mumbai, about 1,317 km from Delhi by road, and supply Faridabad, Gurugram, Delhi, Noida and Ghaziabad through dealers and distributors.
5Cities on this page
2,000+Products from one works
CM/L-7567794Our BIS licence for switches

Key takeaways

  • Made at our works in Marol, Andheri East, Mumbai: about 1,317 km from Delhi by road.
  • Supplied across Delhi NCR through dealers and distributors, and by delivery for office orders.
  • A flat MCB board, at our MRPs: see the worked example below.
  • High-rise societies in Noida, Gurugram and Ghaziabad: modular boards and an MCB board per flat.
  • Society flats: an MCB per circuit, with spare ways.
On this page 7 sections + FAQs

Switch manufacturer for Delhi NCR: the short answer

We make every switch, socket, MCB, box and light we sell at one works in Marol, Andheri East, Mumbai, and supply Delhi NCR from there through dealers and distributors, and by delivery for orders placed through our office.

In Delhi NCR, typical work includes high-rise societies in Noida, Gurugram and Ghaziabad, offices and showrooms in Delhi and Gurugram, and builder floors and houses in Delhi. The sections below take each in turn.

The cities we supply in Delhi NCR, and how far they are

Road distance from our works

Faridabad about 1,290 km
Gurugram about 1,291 km
Delhi about 1,317 km
Noida about 1,319 km
Ghaziabad about 1,340 km

Measured from our works in Marol, Andheri East, Mumbai, on OpenStreetMap routing and rounded. Delivery time depends on the route and the order.

Map: the towns on this page

Map of Faridabad, Gurugram, Delhi, Noida and Ghaziabad with road distance from our works in Mumbai

Drawn by us from OpenStreetMap positions, to scale. The km under each town is the road distance from our works; our works is off the map in the direction of the red arrow.

Delhi is about 1,317 km from our works by road. Dealers across the state stock our ranges.

Cities in Delhi NCR and how we supply them
CityFrom our worksHow to buy
FaridabadAbout 1,290 kmDealers, or delivery
GurugramAbout 1,291 kmDealers, or delivery
DelhiAbout 1,317 kmDealers, or delivery
NoidaAbout 1,319 kmDealers, or delivery
GhaziabadAbout 1,340 kmDealers, or delivery

What Delhi NCR is building

  • High-rise societies in Noida, Gurugram and Ghaziabad: modular boards and an MCB board per flat.
  • Offices and showrooms in Delhi and Gurugram: LED panels, USB chargers, designer plates.
  • Builder floors and houses in Delhi: rewiring with 10kA MCBs and modular boards.
Made in Mumbai

About 1,317 km from Delhi, in Marol, Andheri East.

High-rise societies

Modular boards and an MCB board per flat.

Offices and showrooms

LED panels, USB chargers, designer plates.

Licensed

Switches to IS 3854, BIS licence CM/L-7567794.

A flat MCB board, at our MRPs

Ten single pole 10kA MCBs, a 40A DP incomer and a 10–12 way SPN box come to ₹2,505 at MRP:

Where ₹2,505 goes in a flat MCB board

10 × single pole MCB ₹1,450
SPN box, 10–12 way ₹620
40A DP incomer ₹435

Printed MRPs from our current catalogue, as published in our product guides. Bars to scale; wire and labour are extra.

Add a 30 mA RCCB after the incomer for shock protection, above all for the bathroom and geyser circuits (bought separately; we do not make RCCBs). Our MCB guide works through it circuit by circuit.

Society flats: an MCB per circuit, with spare ways

A flat in a high-rise society has many circuits: lights, sockets, kitchen, each AC and geyser. Each gets its own single pole MCB (₹145), behind a DP incomer, in an SPN box with spare ways for the AC added later.

Our MCB box size list runs from 2–4 way (₹380) to 16–18 way (₹950).

Everything we make for Delhi NCR, with prices

All made at our Marol works, and sold in Delhi NCR at the same printed MRP:

  • MCBs and MCB boxes: 10kA, single pole ₹145; boxes from ₹40. MCBs.
  • Modular switches and switch sockets: from ₹45 (VIZA V000 6A 1 way); 16A sockets from ₹130 (VIZA V270). Modular switches.
  • 1 module and 2 module switches: 1M 6A socket ₹78, 2M 16A socket ₹160. 1 and 2 module switches.
  • Slim and modern designer switches: VIZA Slim 6M plate ₹150; Glasso glass-style ₹748. Designer switches.
  • LED lights: flood from ₹490, street from ₹550, panel and down lights. LED lights.
  • Concealed and surface boxes: concealed from ₹50, surface gang boxes from ₹65. Concealed boxes.
  • Fan regulators: electronic, 4 and 5 step, ₹215 to ₹495. Regulators.

Ask for the BIS licence number on any switch; ours is CM/L-7567794.

From our catalogue: KEMPS K192 6A 3 pin socket and VIYONA square lamp holder / ceiling rose.

How to buy in Delhi NCR

Buy from our dealers and distributors in Delhi NCR (send an enquiry for the nearest), or order through the office for delivery, in full boxes, with 15-day returns.

Projects: send a bill of materials through our contact page. Shops: see our dealer page.

FAQs

Do you supply switches in Delhi?

Yes, through dealers in Delhi NCR and by delivery. Delhi is about 1,317 km from our works by road.

Do you supply Noida, Gurugram, Ghaziabad and Faridabad?

Yes, through dealers in the NCR and by delivery for orders through our office.

What does an MCB board for a flat cost?

Ten single pole MCBs, a 40A DP incomer and a 10–12 way SPN box come to ₹2,505 at MRP. Add a 30 mA RCCB for shock protection (bought separately).

Is there a switch manufacturer in Delhi NCR?

We are a Mumbai manufacturer supplying Delhi NCR through dealers and distributors; everything we manufacture is made at our works in Marol, Andheri East.

Do you make MCBs, LED lights and concealed boxes for Delhi NCR?

Yes: 10kA MCBs and MCB boxes, LED flood, street, panel and down lights, concealed and surface boxes and fan regulators, sold in Delhi NCR through dealers and by delivery.

Why buyers choose Vinayak Electricals

  • Making electrical accessories since 1995, today at our own works in Marol, Andheri East, Mumbai.
  • ISO 9001:2015 certified; switches under BIS licence CM/L-7567794 to IS 3854.
  • Switches, sockets, MCBs, boxes, regulators and LED lights: 2,000+ products from one maker.
  • Printed MRPs, published code by code in our catalogue.
  • Warranty of 5 to 10 years by product; modular plates 5 years.
  • Dealers and distributors across Maharashtra, and delivery all over India.

Published 7 Oct 2026 · Updated 12 Nov 2026

Who designed it & wrote this

@

Team of:

Gaurang Parmar

Fractional C-Suite Executive

STRATEGIC SOLUTIONS

MarketingChief Marketing Officer (CMO)
TechnologyChief Technology Officer (CTO)
DigitalChief Digital Officer (CDO)

Building or rewiring in Delhi NCR?

Send an enquiry for the nearest dealer, or send a bill of materials for a quotation.

Vinayak Electricals is the MCB manufacturer in Mumbai.

Switches & sockets 12 min read

USB Socket for Switch Board: Price, Codes, Wiring

USB socket for a switch board: KEMPS and VIZA USB charger codes with MRP, USB-A vs USB-C ports, what 2 AMP means, a wiring diagram and a no-wiring option.

Browse guides by topic