Key takeaways
- Made at our works in Marol, Andheri East: about 14 km from Dadar, 18 km from Worli and 30 km from Colaba.
- Supplied across Colaba, Fort, Byculla, Dadar, Worli, Parel, Sion and Mahim through dealers and by delivery.
- Premium flats here suit designer plates: the same 6M board is ₹570 with a VIZA Cherry plate and ₹1,178 with Glasso.
- Old buildings: rewire with 10kA MCBs and an MCB box, and modular boards that change one module at a time.
- Full boxes only; send an enquiry for the nearest dealer or a project quotation.
On this page 7 sections + FAQs
Switch manufacturer for South and Central Mumbai: the short answer
We make every switch, socket, MCB and light we sell at one works in Marol, Andheri East, and supply the island city from there. Dealers in South and Central Mumbai stock our ranges, and orders placed through our office are delivered.
The island city's work is mostly inside existing buildings: old flats being rewired, premium apartments being finished, offices and shops being refitted. That shapes which part of the range matters most here.
The areas we supply, and how far they are
Road distance from our works
Measured from our works in Marol, Andheri East, on OpenStreetMap routing and rounded. Green is within 25 km, blue within 100 km, amber further. Travel time depends on traffic.
Map: Dadar, Worli, Byculla and Colaba
Drawn by us from OpenStreetMap positions, to scale. The km under each town is the road distance from our works; dashed lines show direction only, not the road.
Between those points sit Fort, Parel, Sion and Mahim. Dadar is the nearest, about 14 km from our works.
Most of the city’s wholesale electrical trade sits here, around Lohar Chawl; see our wholesale market guide.
| Town | From our works | How to buy |
|---|---|---|
| Colaba, Fort | About 30 km | Dealers in the area, or delivery |
| Byculla | About 21 km | Dealers in the area, or delivery |
| Worli | About 18 km | Dealers in the area, or delivery |
| Dadar, Parel | About 14 km | Dealers in the area, or delivery |
| Sion, Mahim | Near Dadar | Dealers in the area, or delivery |
What South and Central Mumbai is building
- Premium flats: designer plates in glass-style and metallic finishes, USB chargers at bedsides and desks, a 32A DP switch for each AC and geyser.
- Old buildings being rewired: a new MCB box with 10kA MCBs replacing old fuse boards, and modular boards throughout.
- Shops and offices: LED panel and down lights, 16A points and an MCB distribution board.
About 14 km from Dadar, in Marol, Andheri East.
Glasso, Peony glass and Cristal finishes on the same modules.
10kA MCBs and an MCB box to replace old fuse boards.
Switches to IS 3854, BIS licence CM/L-7567794.
A designer bedroom board, and what the plate adds
Take the same 6M bedroom board (two 1 way switches, a 20A 1 way switch for the socket, a 2 way switch and a 16A socket, ₹430 of VIZA modules) and change only the plate. In Cherry white it is ₹570; in Glasso glass-style it is ₹1,178.
6M plate MRP by finish
Printed MRPs from our current catalogue, as published in our product guides. Bars to scale; wire and labour are extra.
The modules stay the same, so a building can use one module range throughout and let each flat choose its plate.
Rewiring an old building: start at the MCB box
Many island-city buildings still run on old fuse boards. When a flat is rewired, the board comes first: a single pole MCB per circuit at ₹145, a DP incomer, a 30 mA RCCB for shock protection (bought separately; we do not make RCCBs), and an SPN box sized with spare ways.
Our MCB guide works through a flat board: ten single pole MCBs, a 40A DP incomer and a 10–12 way box come to ₹2,505 at MRP.
Rewiring is a job for a licensed electrician: the cable sizes and MCB ratings must match the load on each circuit.
Everything we make for South and Central Mumbai, with prices
All made at our Marol works, and sold in South and Central Mumbai at the same printed MRP:
- Slim and modern designer switches: VIZA Slim 6M plate ₹150; Glasso glass-style ₹748. Designer switches.
- MCBs and MCB boxes: 10kA, single pole ₹145; boxes from ₹40. MCBs.
- Modular switches and switch sockets: from ₹45 (VIZA V000); 16A sockets from ₹130 (VIZA V270). Modular switches.
- 1 module and 2 module switches: 1M 6A socket ₹78, 2M 16A socket ₹160. 1 and 2 module switches.
- Concealed and surface boxes: concealed from ₹50, surface gang boxes from ₹65. Concealed boxes.
- Fan regulators: electronic, 4 and 5 step, ₹215 to ₹495. Regulators.
- LED lights: flood from ₹490, street from ₹550, panel and down lights. LED lights.
Ask for the BIS licence number on any switch; ours is CM/L-7567794.
From our catalogue: VIYONA 278 V5 flex box (3x4 m) and VIZA V1265 socket.
How to buy in South and Central Mumbai
Buy from our dealers and distributors in South and Central Mumbai (send an enquiry for the nearest), or order through the office for delivery, in full boxes, with 15-day returns.
Projects: send a bill of materials through our contact page. Shops: see our dealer page.
FAQs
Is there a switch manufacturer in South Mumbai?
We supply South and Central Mumbai from our works in Marol, Andheri East, about 14 km from Dadar, through dealers in the area and by delivery.
Do you supply Colaba, Worli and Dadar?
Yes, through dealers in the area and by delivery for orders placed through our office.
What does a designer switch plate cost?
For a 6M plate: Cristal acrylic ₹495, Peony glass-style ₹630 and Glasso glass-style ₹748, against ₹140 for VIZA Cherry white.
What should I change first when rewiring an old flat?
The board: an MCB per circuit (single pole from ₹145), a DP incomer and an SPN MCB box, fitted by a licensed electrician.
Can I buy directly from your factory?
Yes, through our office, in full boxes; or from a dealer in South or Central Mumbai.
Do you make MCBs, LED lights, concealed boxes and fan regulators for South and Central Mumbai?
Yes. Besides switches and sockets we make 10kA MCBs and MCB boxes, LED flood, street, panel and down lights, concealed and surface boxes, and electronic fan regulators, all sold in South and Central Mumbai through our dealers and by delivery.
Why buyers choose Vinayak Electricals
- Making electrical accessories since 1995, today at our own works in Marol, Andheri East, Mumbai.
- ISO 9001:2015 certified; switches under BIS licence CM/L-7567794 to IS 3854.
- Switches, sockets, MCBs, boxes, regulators and LED lights: 2,000+ products from one maker.
- Printed MRPs, published code by code in our catalogue.
- Warranty of 5 to 10 years by product; modular plates 5 years.
- Dealers and distributors across Maharashtra, and delivery all over India.
Published 7 Oct 2026 · Updated 12 Nov 2026
Who designed it & wrote this
@Team of:
Gaurang Parmar
Fractional C-Suite Executive
STRATEGIC SOLUTIONS