Skip to content
Where we supply

Switches, MCBs and LED lights for Kolkata, Howrah and Siliguri

1,891 kmKolkata from our works

7 min read Published 7 Oct 2026Updated 12 Nov 2026 By Gaurang Parmar

7 short sections · FAQs at the end

Looking for a switch manufacturer in Kolkata or anywhere in West Bengal? We are Vinayak Electricals: we make modular switches, sockets, MCBs, boxes and LED lights at our works in Marol, Andheri East, Mumbai, about 1,891 km from Kolkata by road, and supply Asansol, Durgapur, Howrah, Kolkata and Siliguri through dealers and distributors.
5Cities on this page
2,000+Products from one works
CM/L-7567794Our BIS licence for switches

Key takeaways

  • Made at our works in Marol, Andheri East, Mumbai: about 1,891 km from Kolkata by road.
  • Supplied across West Bengal through dealers and distributors, and by delivery for office orders.
  • A 12-module living room board, at our MRPs: see the worked example below.
  • Older buildings in Kolkata and Howrah being rewired: 10kA MCBs replacing fuses, modular boards.
  • Rewiring older Kolkata buildings.
On this page 7 sections + FAQs

Switch manufacturer for West Bengal: the short answer

We make every switch, socket, MCB, box and light we sell at one works in Marol, Andheri East, Mumbai, and supply West Bengal from there through dealers and distributors, and by delivery for orders placed through our office.

In West Bengal, most of what we supply goes into older buildings in Kolkata and Howrah being rewired, new apartments, and industry around Durgapur and Asansol. The sections below take each in turn.

The cities we supply in West Bengal, and how far they are

Road distance from our works

Asansol about 1,820 km
Durgapur about 1,862 km
Howrah about 1,877 km
Kolkata about 1,891 km
Siliguri about 2,156 km

Measured from our works in Marol, Andheri East, Mumbai, on OpenStreetMap routing and rounded. Delivery time depends on the route and the order.

Map: the towns on this page

Map of Asansol, Durgapur, Howrah, Kolkata and Siliguri with road distance from our works in Mumbai

Drawn by us from OpenStreetMap positions, to scale. The km under each town is the road distance from our works; our works is off the map in the direction of the red arrow.

Kolkata is about 1,891 km from our works by road. Dealers across the state stock our ranges.

Cities in West Bengal and how we supply them
CityFrom our worksHow to buy
AsansolAbout 1,820 kmDealers, or delivery
DurgapurAbout 1,862 kmDealers, or delivery
HowrahAbout 1,877 kmDealers, or delivery
KolkataAbout 1,891 kmDealers, or delivery
SiliguriAbout 2,156 kmDealers, or delivery

What West Bengal is building

  • Older buildings in Kolkata and Howrah being rewired: 10kA MCBs replacing fuses, modular boards.
  • New apartments: one plate design per building, 32A DP switches.
  • Industry around Durgapur and Asansol: TPN boards and LED flood lights.
Made in Mumbai

About 1,891 km from Kolkata, in Marol, Andheri East.

Older buildings

10kA MCBs replacing fuses, modular boards.

New apartments

One plate design per building, 32A DP switches.

Licensed

Switches to IS 3854, BIS licence CM/L-7567794.

A 12-module living room board, at our MRPs

A living room with one fan and several lights is a 12M board: in VIZA Cherry white it costs ₹1,364, and the ₹360 regulator is the biggest item.

Where ₹1,364 goes on a 12M board

V278 regulator ₹360
4 × V541 switches ₹224
2 × V546 20A switches ₹178
12M Cherry plate ₹213
V263 16A socket ₹160
V264 16A socket ₹150
V542 2 way switch ₹79

Printed MRPs from our current catalogue, as published in our product guides. Bars to scale; wire and labour are extra.

Rewiring older Kolkata buildings

Many older buildings still run on fuses. When a flat is rewired, start at the board: a single pole MCB per circuit (₹145), a DP incomer, a 30 mA RCCB for shock protection (bought separately; we do not make RCCBs), an SPN box sized with spare ways, then modular switch boards throughout.

Our MCB guide explains fuse vs MCB; rewiring is a job for a licensed electrician.

Everything we make for West Bengal, with prices

All made at our Marol works, and sold in West Bengal at the same printed MRP:

  • Modular switches and switch sockets: from ₹45 (VIZA V000); 16A sockets from ₹130 (VIZA V270). Modular switches.
  • MCBs and MCB boxes: 10kA, single pole ₹145; boxes from ₹40. MCBs.
  • Fan regulators: electronic, 4 and 5 step, ₹215 to ₹495. Regulators.
  • 1 module and 2 module switches: 1M 6A socket ₹78, 2M 16A socket ₹160. 1 and 2 module switches.
  • Concealed and surface boxes: concealed from ₹50, surface gang boxes from ₹65. Concealed boxes.
  • LED lights: flood from ₹490, street from ₹550, panel and down lights. LED lights.
  • Slim and modern designer switches: VIZA Slim 6M plate ₹150; Glasso glass-style ₹748. Designer switches.

Ask for the BIS licence number on any switch; ours is CM/L-7567794.

From our catalogue: VIYONA royal 3 pin plug top and KEMPS Peony K503 bell push.

How to buy in West Bengal

Buy from our dealers and distributors in West Bengal (send an enquiry for the nearest), or order through the office for delivery, in full boxes, with 15-day returns.

Projects: send a bill of materials through our contact page. Shops: see our dealer page.

FAQs

Do you supply switches in Kolkata?

Yes, through dealers in West Bengal and by delivery. Kolkata is about 1,891 km from our works by road.

Do you supply Howrah, Durgapur, Asansol and Siliguri?

Yes, through dealers and by delivery for orders through our office.

What does a 12 module living room board cost?

In VIZA Cherry white, ₹1,364 at MRP; the ₹360 regulator is the largest item.

Is there a switch manufacturer in West Bengal?

We are a Mumbai manufacturer supplying West Bengal through dealers and distributors; everything we manufacture is made at our works in Marol, Andheri East.

Do you make MCBs, LED lights and concealed boxes for West Bengal?

Yes: 10kA MCBs and MCB boxes, LED flood, street, panel and down lights, concealed and surface boxes and fan regulators, sold in West Bengal through dealers and by delivery.

Why buyers choose Vinayak Electricals

  • Making electrical accessories since 1995, today at our own works in Marol, Andheri East, Mumbai.
  • ISO 9001:2015 certified; switches under BIS licence CM/L-7567794 to IS 3854.
  • Switches, sockets, MCBs, boxes, regulators and LED lights: 2,000+ products from one maker.
  • Printed MRPs, published code by code in our catalogue.
  • Warranty of 5 to 10 years by product; modular plates 5 years.
  • Dealers and distributors across Maharashtra, and delivery all over India.

Published 7 Oct 2026 · Updated 12 Nov 2026

Who designed it & wrote this

@

Team of:

Gaurang Parmar

Fractional C-Suite Executive

STRATEGIC SOLUTIONS

MarketingChief Marketing Officer (CMO)
TechnologyChief Technology Officer (CTO)
DigitalChief Digital Officer (CDO)

Building or rewiring in West Bengal?

Send an enquiry for the nearest dealer, or send a bill of materials for a quotation.

Vinayak Electricals is the MCB manufacturer in Mumbai.

Switches & sockets 12 min read

USB Socket for Switch Board: Price, Codes, Wiring

USB socket for a switch board: KEMPS and VIZA USB charger codes with MRP, USB-A vs USB-C ports, what 2 AMP means, a wiring diagram and a no-wiring option.

Browse guides by topic